Wireless Systems For Safety Edges And Other Accessories

RADIO MOBILE EVO TRANSMITTERS AND RECEIVERS

Find an installer Instructions Brochure

The Radio EVO is the third generation of the wireless communication system with better performance and new features. The wireless receiver unit has two channel outputs and can have up to a maximum of 6 transmitter units programmed to the unit. The wireless transmitters are available in two versions. The first is a stand alone boxed transmitter that can be fixed to the gate. The second is an internal unit, this transmitter fits inside the edge so there are no external wires.

  • Uses standard AA batteries for easy maintenance
  • 2 Year battery life
  • Up to 50m range
  • CAT 2 safety edges system
  • Program up to 6 transmitter to 1 receiver
  • Self adjusting multichannel 868MHz
  • Signal quality check

GHOST NON CONTACT WIRELESS SAFETY EDGE

Find an installer Instructions Brochure

The Radio EVO GHOST is the new safety edge solution based on a capacitive wireless system. It can detect obstacles before the impact with the gate. The transmitter produces an inductive magnetic field within the safety edge to produce a non contact sensing zone. The ghost mode is activated via the use of a reed sensor and magnets positioned on the sliding gate. Up to 5 further standard Evo transmitters can be added to the system totalling 6 transmitters to the receiver unit.

  • Uses 3.6V AA batteries
  • 2 Year battery life
  • Up to 50m range
  • CAT 2 safety edges system
  • Self adjusting multichannel 868MHz
  • Signal quality check
  • Uses an inductive magnetic field
  • Adjustable field strength
  • Ghost mode activated via reed sensor and magnets

SCHED Safety Edge Controller

Find an installer Instructions Brochure

The SCHED is a CAT 2 safety edge controller which accepts up to 4 8k2 resistive inputs and provides 2 NC (normally closed) outputs. This allows older gate systems to be quickly and easily brought up to EN12453 standards providing the control panel has a stop and revers feature, such those found on our Gate 2 DG.

  • 4no 8k2 inputs
  • 2 channel NC out puts
  • Compatible with any control system
  • CAT 2 Fully complaint with EN12453