Max gate weight 700Kg
Max cycles per hour 55 or 100% with invertor control panels
Max leaf length 7m
With 3 pump versions to alter operating speeds and three operator lengths, it can be used for pedestrian gates and vehicle gates. Brass and stainless steel internal valves and connectors. An oil filled bath provides continuous lubrication and rapid cooling for all moving parts, whilst a thermal overload built into the motor ensures the highest level of protection.
High levels of safety can be provided by the addition of SEA Linear Encoders. Installed underneath the cover tubes of the motors, the encoders will stop and reverse your gates almost instantly allowing gates to meet EN12453 regulations without the need for additional safety edges which could be vandalised on abused sites.
The Half Tank operators have been the motor of choice for the MOD throughout the midlands demanding that only SEA equipment is installed due to their reliability and safety record.
A key manual release is provided making this one of the most secure operators on the market.
| Specifications | Half Tank 270 1.0ltr/ 1.5ltr | Half Tank 390 1.5ltr/ 2.0ltr |
| Supply Voltage | 230Vac+5% 50/60Hz | 230Vac+5% 50/60Hz |
| Motor Power | 220 W | 220 W |
| Shaft Stroke | 270 mm | 390 mm |
| Shaft Speed | 1.0/ 1.5cm per sec | 1.5/ 2.0 cm per sec |
| Cycles Hour | 55 | 55 |
| Operating temperature | -20°C + 55°C | -20°C + 55°C |
| Operator Weight | 11,4 kg | 13,6 kg |
| Max leaf length | 6m | 7m |
| Opening Degrees | 90° – 120° | 90° – 125° |
| Protection class | IP55 | IP55 |
| Starting Capacitor | 12.5 uF | 12.5 uF |
| Max Pushing Force | 640 daN | 640 daN |
